Mantis Encoder
Page 7
Mantis Encoder
Video
Select the desired video input
Audio
Digital, RCA, Line-in (mini-jack)
Video Tuning / Volume Tuning – not
available for digital inputs
Scale Down – Normally set to “No” where the output resolution
size is same as input, or select output resolution size. Input size
must be scaleable.
H264 Encode – Main 3.0
(recommended), Main 3.1
Audio Stereo – Stereo or Mono
Stereo Bit Rate – Normally 128K, or
select desired rate
Video Bit Rate – Select desired
streaming / recording bit rate
Video Rate Mode – VBR or CBR. VBR recommended.
Analog Audio System – SMPTE (recommended), EBU. Sets the
input type when analog audio is used.
RTMP Publish URL – Available is server set to “RTMP_Publish”.
Enter the URL to push the stream to. If CDN requires
authentication, enter username and password.
RAW UDP Stream – Available if server is set to “RAW UDP”, enter
the IP Class D address and port (e.g. 239.1.2.3 port 5000).
Apply – Enters all values and applies them to the encoder.
