Discovery Telecom 47019, Instruction Manual

settings

and

operation

of

the

receiver

Barometer/Altitude Setting

 – After battery installation of the Receiver, 

it will enter altitude setting mode directly.  Press the UP or DOWN 

arrows on the side of the Receiver to select the barometer units in 

“inHg” or “hPa” or “mb”.  After choosing the units, press PRESSURE 

to confirm.  Next, press the UP or DOWN buttons to enter your current 

altitude and press PRESSURE to confirm and exit the setting.  This 

allows the Receiver to provide a more accurate barometric pressure 

and weather forecast readings. You can change the 

altitude setting during normal operation by pressing 

and holding down the PRESSURE button to enter the 

altitude setting mode and press PRESSURE to confirm. 

Synchronize Remote Sensor

 – Press and hold the 

CHANNEL button on the side of the Receiver. You will 

hear a beep when the unit is searching for the remote.

Indoor and Outdoor Temperature

  – Can be 

displayed on the Receiver. Press the CHANNEL button 

on the side of the Receiver to switch from “Indoor” 

data to “Outdoor” data (Channel 1). You can also have 

the indoor and outdoor information automatically 

switch about every six seconds when you push the 

CHANNEL button where you see an icon referring to 

“switch” mode. A color bar graph on the LCD shows 

temperature changes as the information changes.

4