VoIP
²
ALL 8 - 16 - 24 Channel Gateway User Guide
http://www.dtt.tw
21
CALL DURATION PARAMETERS
PARAMETER
DESCRIPTION
Current Balance
The total number of units for the SIM.
A value greater than 0 must be defined.
Primary Bill Interval
The interval of time (in seconds) for the beginning of the call.
Primary Interval Count The number of times the Primary Bill Interval will repeat.
Primary Cost per Bill Int The number of units the Primary Bill Interval will count.
Secondary Bill Interval The intervals of time (in seconds) after the end Primary Bill
Interval.
Secondary Cost per Bill
Int
The number of units the Secondary Bill Interval will count.
Max Call
The maximum number of calls per connection.
Min Call
The minimum number of calls per connection.
STATISTICS (READ ONLY)
Call Count
The number of calls the SIM made the last time it was
connected.
Call failed
The number of failed calls the SIM made the last time it was
connected.
5)
Click
Save
.
4.1.1.
REGISTERING THE LOCAL SIM IN THE CELLULAR NETWORK AUTOMATICALLY
When the Local SIM is active by default it registers in the cellular network automatically when
inserted in the SIM socket.
To set the SIM to be active by default:
1)
From the Main Toolbar, click
Ports
.
2)
In the port list on the left side of the window, select
General
.
3)
In Default SIM, select
Local SIM work by default
.
4)
Insert the SIMs to the cellular port’s Local SIM sockets.
5)
On the Main Toolbar, click
Monitor
. The monitor window appears displaying the status of the
cellular ports.
4.1.2.
ASSIGNING A LOCAL SIM TO WORK BY TIME TABLE
When the Local SIM is active by Time Table it registers in the cellular network according to the
schedule defined here.
When you set the time table, you mark a Local SIM to work at a specific time.
