7
Figure 7. IR Sensor behind a lens
5. To secure the IR head, peel the paper off the strip of tape on the
head (the IR signal goes through the tape), and stick the head into
place.
6.
For DISH Player-DVR 522
and
DISH Player-DVR 625,
place the
IR head about ¼” from the left side of the front panel lens.
Figure 8. DISH Player-DVR 522 IR sensor
7.
For DISH 301, DISH 311, DISH 322 receivers
, you can use the IR
head clip to set up the IR extender cable.
Figure 9. Attach the IR Extender Head to
the receiver’s bottom panel
Pyramid.book Page 7 Wednesday, February 16, 2005 4:00 PM
