background image

4

Troubleshooting

Getting More Help

005

The receiver may not have 
received authorization for 
programming yet. The satellite 
dish may have moved so that it is 
no longer picking up the satellite 
signal. The cable connections 
may have loosened or have 
moisture inside. There may be an 
interruption of the satellite signal.

If you have just authorized your receiver 
(added it to your account), then wait a few 
minutes to see if the message has been 
removed. Make sure that all required cables 
are in place, and check that all cable 
connections are both tight and dry (for 
outdoor cables and connections).

Make sure that the satellite dish has a clear 
line of sight to the satellite(s). Check whether 
branches or leaves are in the line of sight of 
the dish antenna. 

Check that the 

Signal Strength

 bar on the 

Point Dish screen

 (select the 

Settings

 tile,  

scroll down, and select 

Point Dish

) is green 

and displays the word 

Locked

. If not, the 

contact your installer to re-aim the satellite 
dish, if necessary, to obtain the strongest 
possible signal. 

If you have not authorized the receiver, then 
call the Customer Service Center at 1-800-
333-DISH (3474) and do so.

006

The receiver may not be 
connected to an active telephone 
line or broadband Internet 
connection.

You must keep each installed receiver 
connected to an active telephone line or 
broadband Internet connection at all times.

011, 012

Viewers in specific areas are 
prohibited from watching certain 
programs. For

 

example, viewers 

who live close to a particular 
football stadium may be 
prohibited from watching football 
games that are played in that 
stadium.

Program providers, not DISH Network, specify 
which programs are blacked out for specific 
areas.

013, 014

You may have tried to tune to a 
program on a channel to which 
you don’t subscribe.

You must subscribe to a channel before you 
can tune to a program on that channel. Call 
the Customer Service Center at 1-800-333-
DISH (3474) to subscribe to one (or more) 
new channel(s).

If you subscribe to the channel and you see 
these messages, then press the red reset 
button behind the small door on the left side 
of the receiver’s front panel and see if the 
message has been removed after the reset is 
complete.

If you believe this message was displayed by 
mistake, call the Customer Service Center at 
1-800-333-DISH (3474).

Message

 Number

Possible Reason(s)

What to Do

Summary of Contents for 176779














































Reviews: