INSTALLATION
On the
Main Menu
, drive the cursor onto the third
instruction
OK
key to enter its submenu
ͩ
,
</>
key to
OK
Put the cursor onto the second instruction
digit-keys
directly to modify
Respectively, highlight the instructions of
LNB Freq1
and
LNB Freq2
, punch the
the parameter or, punch the
digit-keys
to input the
value directly. The accurate values of
LNB Freq1
and
LNB Freq2
refer to the values indicating on the LNB
of the using antenna
Highlight the instruction
LNB Power
, punch the
</>
key
to switch the state, normally, keep the state of it on the
Auto
, however,
On the picture that the single machine is being
used, keep the status of the
LNB Power
on the
Auto
On the other picture that the loop connection is
Press the
OK
key to enter its submenu.
Drive the cursor onto the first instruction; press the
Put the cursor onto the first instruction
Satellite Name
,
press the
</>
key to alternate the satellite or, press the
OK
key to show the table including all the preinstalled
satellite on the right side, punch the
highlight one item, punch the key to
opt
ͩ
,
</>
key to alternate
Longitude(x10)
, input the digit by pressing the
E.g, if the parameter value of Local Oscillation (i.e
.,
L.O.) on the LNB is indicating as 5.15GHz, then [LNB
Freq1] and [LNB Freq2] should be both set as 5150; if
the parameter value of Local Oscillation (i.e.
,
L.O.) on
the LNB is indicating as 11.3GHz, then [LNB Freq1]
and [LNB Freq2] should be both set as 11300.
8
Summary of Contents for DVB-S6800PLUS
Page 9: ...MENU TREE 7 ...