15
Network Setup
Main Menu - Settings
To access Internet Services you will need to
connect the receiver to the Internet. You can
connect using two methods:
Wireless (Built-in WIFI)
This receiver comes with a built in WIFI
dongle so it can connect wirelessly.
1. Select Wireless by pressing OK
2. Scan for a WiFi network Automatically or
you can enter it in manually.
4. Select your WiFi network and enter in the
network password using the ◀▶▲▼ keys on
your remote.
Ethernet Cable (LAN)
Connect an Ethernet cable from your router
into the back of the receiver to connect to
the Internet.
Time Settings
Main Menu - Settings
Time Mode
Set the receivers time via the Freeview
Broadcast or via the Internet (Requires
Internet Connection)
Region
Set to your region to get the relevant
channels available in your area.
