disperator EXCELLENT 550A-GKF Series, User Manual

User Manual in Original

Dok. ref: 550A_GKF_am_sv_210525
DISPERATOR AB

Tel: 08-724 0160   

E-mail: info@disperator.se

Mälarvägen 9, 141 71 Segeltorp   

Web page: www.disperator.se

7 / 35

6 / 35

1.2.   Personnel Qualifications and Training

All personnel managing 

the below tasks for the machine as described in this manual, must have the 

necessary qualifications to carry out this work. 

Areas of responsibility, scope of authority and staff 

supervision must be carefully defined by the machine owner. If the personnel do not have the necessary 

qualifications for this, they must receive training and instructions. Such training can be provided by the 

manufacturer / supplier. Moreover, it is the responsibility of the machine owner to make sure that all 

users read and understand the content of this User Manual.

Moving the Machine

Staff responsible for moving the machine must have knowledge about the handling of the lifting gear 

and stopping devices and have knowledge of applicable safety regulations for these. If they lack this 

knowledge, they must receive the required training.

Installation

Personnel responsible for the installation of the machine must have knowledge equivalent to education 

in industrial mechanics/technician. The electric connection must be performed by trained and certified 

electrician.

Commissioning and Maintenance

Personnel responsible for commissioning, overhaul and maintenance of the machine must be familiar 

with all functions, and how to operate these functions. Furthermore, they must know of all safety 

precautions in this manual, and which in other respects also are valid where the machine is used. 

Operation

All persons who operate and maintain the machine must be aware of the risks that may occur with its use 

and as described in this manual.

Service and Repair

Responsible personnel for service and repair of the machine must have knowledge equivalent to 

education in industrial and design mechanics, and also know and understand the technical data of the 

machine described in this manual. Assisting personnel for these jobs must be trained and performed 

repair work must be checked by the machine owner.