MKT.183.5 | DISPLAX
TM
OQTOPUS USER GUIDE
13
USING NON EUROPLUG POWER SOCKETS
rd
you will need to use an adaptor. As the space inside the table is tight, make sure to use a
small adaptor as shown in the example below.
ATTACH THE GLASS AND METALLIC GRID BACK TO THE TABLE
Holding very carefully by the edges of the glass, place B on A, aligned by the holes of the
Screw it again using H. TIP: Insert and screw just enough to hold all the screws and only then
screw until the end.
INSTALL SOFTWARE ON THE PC
In the supplied
unauthorized installation of software.
To install software the admin password is required:
#edgdisplax$
