MKT.183.5 | DISPLAX
TM
OQTOPUS USER GUIDE
8
LEG ASSEMBLING
You will need the following components:
C; D; E; F; H; R; S
You will also need an unbrako / hex key, not included.
Make sure that D has the inside holes facing up.
Use two S per F.
Ea should be the last leg to be assembled.
Attach Ea to the face of D with a cut out in the hole and use that cut out for the cable.
When attaching Ea, use R to hold the cable facing up.
Push the female connector from Ea up through D.
Unscrew C from A. Attach C to D using I. Make sure you pull the electric cable through C
before.
The longer edge of C must be aligned
below.
04
