background image

English

Installation

 

Instruction

1

UNPACKING INSTRUCTIONS

!

  Carefully  open  the  carton,  remove  contents  and  lay  out  on  cardboard  or  other 

   protective surface to avoid damage.

!

  Check  package  contents  against  the  Supplied  Parts  List  in  the  next  page  to  assure 

    that  all  components  were  received  undamaged.  Do  not  use  damaged  or  defective 

   parts.

!

 Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

!

  Install  and  operate  this  device  with  care.  Please  read  this  instruction  before 

installation,  and  carefully  follow  all  instructions  contained  herein.  Use  proper  safety 

equipment during installation.

!

  Please  call  a  qualified  installation  contractor  for  help  if  you  don't  understand  these 

directions or have any doubts about the safety of the installation.

Do not use this product for any purpose or in any configuration not explicitly specified 

in this instruction. We hereby disclaims any and all liability for injury or damage arising 

from incorrect assembly, incorrect mounting, or incorrect use of this product.

Summary of Contents for SSW004








Reviews: