4
Enjoy your
Enjoy your
new protective
new protective
enclosure!
enclosure!
CONTACT INFORMATION:
www.displays2go.com
PHONE: 844-221-3388
MOUNT TV TO ENCLOSURE
9. Two people lift the TV and carefully insert into the enclosure.
10. Fit
bracket
arms
attached to the back of the TV
onto the mounting bracket, which comes
pre-installed in
side
the enclosure.
11. Reach under TV to tighten screw on bottom of the bracket, which will hold unit in place.
12. Slide cable through hole at the bottom of the enclosure.
INSTALLATION NOTES
TROUBLESHOOTING
If unit’s fans do not work, check for the following:
- No Power | Solution: Connect to power supply
- Temperature Too Hot/Cold | Solution: Set thermostat to proper temperature (~77 °F)
ENVIRONMENT
- Wall should be flat and able to bear the weight of the unit.
- Keep away from heat sources and direct sunlight.
- Fans on unit can be turned on to help circulate air. Power switch is on inside top of unit.
SPECIFICATIONS
Voltage
110/220 V
Rated Power
60W
Working Temperature
14 - 122F
Product Weight
ENCLTV5055: 88.2 lbs
ENCLTV5765: 124.8 lbs
Dimensions
ENCLTV5055: 53.9” (L) x 32” (W) x 6.9” (D)
ENCLTV5765: 72.3” (L) x 42.1” (W) x 6.9” (D)
Power Cords (Fan)
UL Listed
