background image

1660K014E 

 

Page 1 of 26 

 

Introduction to the DC-10SR

 

The  DC-10SR  display  is  presented  as  an  easy-to  use  clock  adjusted  and  calibrated  at  factory.  The 

main window shows the current time in HH:MM format. The main window can be set to turn on and turn off at 

the time set by user and is adjustable in brightness 

(see “Parameters” in this manual). In all cases, the display 

never  turns  off.  There  are  add-on  functions  depending  on  the  display.  These  functions  are  fully  compatible 

and can be combined with each other: 

If the display includes option A, it has an integrated GPS. The antenna contents a magnet that permit 

to  fix  it  to  a  magnetic  surface.  The  first  time  the  display  is  turn  on,  the  quality  of  the  GPS  signal  must  be 
verified some minutes after the power-up. This is done using one of the parameters of th

e display (see “GPS 

option

” in this manual).  

If the display includes option NE (Ethernet connectivity), this display hosts a web site where the user 

can see the status of the display and configure it. This function allows the display to be used as a server for 
other displays to synchronize the hour through the Ethernet, as well as updating its time and date through a 

SNTP  server.  User  can  configure  and  request  the  time  through  TCP/IP  commands.  The  default  IP  is 
192.165.1.100. 

See “Ethernet option” in this manual for more information. 

If  the  display  includes  option  X  (RS-485  connectivity),  this  display  can  be  configured  as  a  RS.485 

server/client. This means that the display can connect  with  other displays to sync between  them, as well as 
the  user  communication  through  commands.  If  the  display  also  includes  the  GPS  or  Ethernet  option,  the 
display can work as a bridge between both options. See “RS-485 option” for more information  

 

 

TECHNICAL MANUAL DC-10SR 

Clock with GPS, Ethernet and RS-485 functions 

Summary of Contents for DC-10SR


























Reviews: