User Manual
Safe Money automatic safe
9
FIXING INSTRUCTIONS ON THE SURFACE
FIXING OF THE AUTOMATIC CASH REGISTER FROM INSIDE THE CASE TO THE FLOOR
REAR
FRONT
LEFT FRONT SIDE
REFERENCE ARROW
TOP VIEW
Surface
Insert the safety
lock to keep the
door open.
1) Place the plate on the surface, where you want to install the
automatic cash register.
2) Take the holes on the plate as a reference (fig.7) through a pointed
object/marker and drill with a 9mm drill bit for points A, B, C, D.
3) Remove the 4 feet present under the base as shown in fig.3
4) Place the plate under the top and screw in with 4 x M8 Allen
screws, in the holes A, B, C, D.
The height of the screws depends on the thickness of the M8 XI7
surface (+ surface thickness.)
The screws should not protrude from the base of the case.
