www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite
10
Charging the Handheld Batteries
1.
Unscrew and remove the battery tube from the light head.
2.
Remove the battery carrier from the battery tube.
3.
Remove the individual 18650 batteries from the battery carrier.
4.
Insert the batteries into the charger. (See included charger manual for
specific details relating to the charger.)
5.
Plug the charger into a wall outlet.
6.
Allow the batteries to fully charge.
It can take up to 12 hours for the batteries to charge from a full
discharge. The LEDs on the charger will blink to indicate that the
battery is charging. The battery is fully charged when all of the LEDs are
lit solidly.
Maintaining the Batteries
•
Store the batteries at room temperature and away from moisture.
•
Ideally, store batteries in a 30-50% charge condition to maximize life.
•
The canister battery is O-ring sealed in the canister to prevent any
moisture from contacting the cells and should not be removed. The
battery does not have to be removed when storing the light.
•
Before every use, charge the battery completely.
•
Do not plug the light head into the battery when not in use. The
canister lid can be turned 180 degrees and reinstalled for transport and
storage. The battery is not connected to the light in this position to
prevent accidental activation.