www.diverite.com
July 2017 © Lamartek, Inc. dba Dive Rite
17
1. Rotate the magnetic switch to the right to turn the light on.
2. Rotate the magnetic switch to the left to turn the light off.
Switching Between Modes
1.
With the light on, turn the light off and back on within three seconds to
switch to the next mode.
2.
Repeat step 1 until the desired mode is reached. The mode pattern is:
High—Medium—Low—Strobe and then back to High.
3.
Rotate the magnetic switch off to turn the light off.
4.
If the light is turned off for more than three seconds it will start back in
High mode when turned on again.
Care, Maintenance, and Storage
With proper care and service, your HP50 Lighting System can provide you
with years of safe, enjoyable use. Without proper care, your HP50 can
become damaged and be either unserviceable or dangerous to use.
•
Prior to taking the light underwater, ensure that all O-rings and latches
are secure. Thoroughly inspecting your light prior to the dive minimizes
the risk of flooding the light. Most floods are caused by missing or
damaged O-rings or unlocked latches. The cord should also be
inspected for any cuts or damage. Cuts in the cord can allow water to
flood the light.
•
Inspect the light head and canister for any water leakage or other
damage.
