27FEB08
User Product Data Sheet
2 / 4
LT6078LED-500 - LED Flashlight
To install the batteries:
1.
Unscrew the handle of the light where it attaches to the light head.
2.
Slide the handle down and off the battery holder.
3.
Pull the battery holder out of the light head.
4.
Install the batteries as detailed in the battery holder.
5.
Ensure that the O-rings are free from dirt and debris.
6.
Insert the battery holder into the light head, making sure the contacts at the top of
the battery holder line up with contacts at the base of the light head.
7.
Slide the handle over the battery holder until it contacts the light head.
8.
Screw the base onto the light head.
Turning the light on and off
Before using the light, make sure the batteries are installed and in good working order.
Caution:
The light can be used out of the water. However, exercise caution when
using the light out of the water. The light is designed primarily for use underwater.
Water serves to remove heat from the LEDs. Excessive use out of the water can
shorten the life of the LEDs. If the light head begins to feel exceptionally warm, turn
the light off. Avoid looking directly at the LEDs when the light is turned on.
