8
Dosing:
Warning:
Wear gloves, goggles and appropriate (protective)
working clothes when handling chemical products!
Danger:
Use chemical products recommended by Diversey
only and always observe the product information.
Using unsuitable products (e.g. products containing
chlorine, acids or solvents) may cause harm to health
and severe damage to the machine.
Notice:
For a precise dosage, use the scale in the dosage
cup.
- The filling level mark on the tank corresponds to the
mark in the dosage cup. The type of machine is also
noted in the dosage cup!
Dosage cup application
Notice:
TASKI offers an automatic dosage feature as an op
-
tion. It is possible to mount it additionally.
- Please contact your customer service.
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en
-
vironment.
Beginning work with the machine
Warning:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Notice:
To ensure safe operation, always keep both hands
on the steering wheel/driving handle while operat
-
ing the machine.
Warning:
When driving the machine for the first time, test it
out in an empty space to get familiar with the ma
-
chine.
Warning:
If there is a danger of falling objects during use of
the machine, the necessary safety precautions
must be taken or adhered to in accordance with na
-
tional regulations.
Cleaning start
Notice:
Diversey recommends sustainable working by de
-
termination of the correct product dosing quantity.
Overdosing or underdosing will lead to unsatisfactory
cleaning results.
Notice:
TASKI offers an automatic dosage feature as an op
-
tion. It is possible to mount it additionally.
- Please contact your customer service.
Information on
the package of
the product
Tank capacity
Dosage cup
0.5%
1/2
1 x 1/2
MAX
1 x MAX
1%
1/2
1 x MAX (2 x 1/2)
MAX
2 x MAX
• Fill the product you have measured
with the dosage cup into the fresh
water tank.
• Slightly lift the tank cover.
• Push the tank cover support slightly inwards.
• Close the tank cover.
• By pushing gently on the front part of the tank cover you
lock the tank.
• Lower the suction nozzle.
• Switch on the machine (key switch).
The indicator elements lights up briefly.
• Lower the tool: see variant on page 7.
• Press the Suction unit ON/OFF but
-
ton.
The display lights up; the suction en
-
gine starts.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start
-
ed when the brushes rotate.
• Select the desired dosing by press
-
ing the +/- buttons from level 1-6.
• By gently pushing the driving switch
into the direction of movement the
machine is set into motion.
