NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMR
5/5/20
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS:
ANGLES:
CABINET SQUARENESS
C7, D7, & P7 SERIES TABLES
STANDARD TABLES - WOOD LEGS
ASSEMBLY INSTRUCTIONS
REV A
4 OF 10
NTS
EMR
5/5/20
NOTE:
1.
STEP 2:
INSERT HANGER BOLT ON ONE LEG THROUGH THE CORNER
BRACKET AND INSERT LOCK WASHER AND HEX NUT.
SCREW ON NUT USING A
1
2
" WRENCH OR
1
2
" SOCKET AND
TORQUE WRENCH, TO A MINIMUM OF 12FT LBS BUT NOT TO
EXCEED 17FT LBS.
REPEAT FOR OTHER LEGS.
NOTE: IF YOUR TABLE HAS BRACES AND STRETCHERS, DO
NOT TIGHTEN NUTS ALL THE WAY. SEE STEP 4 AND 5 FOR
CLARIFICATION.
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
CLOSE UP OF CORNER LEG ASSEMBLY
K:\AutoCAD\Assembly Instructions\C7, D7, & P7 SERIES TABLES.dwg,
11/2/2021 12:24:19 PM, DWG To PDF.pc3
