NAME
DATE
DESCRIPTION
REVISION LEVEL
NAME
DATE
DESCRIPTION
EMR
5/5/20
CREATED ASSEMBLY INSTRUCTIONS
REV.
A
ECN NO.
-
IN HOUSE ASSEMBLY TEMPLATE
DWN
TITLE:
BY:
BY:
APR
DATE
DWN:
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
BY:
APR
APR:
DATE
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
ALL DIMENSIONS ARE IN INCHES UNLESS
NOTED OTHERWISE
DECIMALS:
ANGLES:
CABINET SQUARENESS
C7, D7, & P7 SERIES TABLES
STANDARD TABLES - WOOD LEGS
ASSEMBLY INSTRUCTIONS
REV A
8 OF 10
NTS
EMR
5/5/20
NOTE:
1.
STEP 6:
IF YOUR TABLE DOES NOT HAVE A SHELF, SKIP TO STEP 7.
WITH HELP FROM ANOTHER PERSON, TIP TABLE ON ITS SIDE.
ATTACH SHELF TO STRETCHER AND BRACES BY SCREWING INTO POCKET HOLES LOCATED ON UNDERSIDE
OF STRETCHER AND BRACES.
NOTE: HALF DEPTH SHELVES ARE TO BE CENTERED ON ALL DOUBLE SIDED TABLES (OVER 24" DEEP) BUT
ARE TO BE OFFSET TO THE BACK AND OVER THE STRETCHERS ON SINGLE SIDED (UNDER 24" DEEP) TABLES .
**NOTE**
BE SURE TOP ASSEMBLY IS ON A CLEAN
SURFACE SUCH AS PACKAGING
FOAM, CARDBOARD, OR A BLANKET
TO PREVENT DAMAGE
HALF WIDTH SHELF SHOWN ON TABLE OVER 24" DEEP
HALF WIDTH SHELF SHOWN ON TABLE UNDER 24" DEEP
SHELF - CENTERED
SHELF - OFFSET
ATTACH SHELF THROUGH
POCKET HOLES LOCATED
ON STRETCHER AND
BOTH BRACES
K:\AutoCAD\Assembly Instructions\C7, D7, & P7 SERIES TABLES.dwg,
11/2/2021 12:24:39 PM, DWG To PDF.pc3
