18
19
Solution:
set contrast to maximum…usually only PC/Mac
have this sort of setting (smartphones don’t)
Problem:
Programming device is too slow and cannot keep
up with required timing
Solution:
Use a different programming device
Problem:
Programming mode not activated properly
Solution:
Follow procedure described above
Problem:
Not enough light gets into the watch
Solution:
Make sure the back of the watch is in direct
contact with the programming device’s screen. For devices
with a touchscreen, make sure you do not disturb the
script’s operation. The best way to avoid this is to lay the
device flat on a table with the watch on top of it
