CONTROL PCB
WARNING: If you don’t screw them now, you won’t be able to do it later!!! Make sure they are
tightly fastened, use a tool for this purpose.
2x4 Male Pin Headers (2)
Description / Notes
Place and solder the Male Pin Header on the opposite side of
silkscreen. These will be placed at same side as SMD components.
It is the shorter pins that you are soldering and long ones will
connect the boards. Please make sure they are straight.
Solder points
JP1, JP3
Male/Female Spacers (2)
Description / Notes
Secure the two 12 mm male/female spacers (through the holes
with silver outlines) with the main body of the spacer on the
component side, and the nut on the opposite.
Summary of Contents for Mutes
Page 6: ......
