DIVUS HEARTBEAT user manual .
19
3.1.7
STEP 7 NETWORK CONFIGURATION - RESIDENTIAL INTERCOM
Usually you may keep these default settings for the RIN and therefore use static addresses of the 192.168.69.0
network, or change them to your special needs. If needed, you may also activate a DHCP server or a DHCP client
function. The recommended setting is using static IP addresses for this network.
If using the DHCP server function for the RIN, please make sure that there is no other device in this network
having an active DHCP service!
3.1.8
STEP 8 SUMMARY / LAST STEP
This last step shows the access data and the most important settings to be confirmed pushing the FINISH button.
Please note that you have to remember these settings to access the web interface from here on!
After pushing the FINISH button, the system will reboot to apply all the settings.