DIVUS HEARTBEAT user manual .
24
•
IP address
•
MAC address
•
The port they are connected to (on the HEARTBEAT or on the DMS)
•
Depending on the type of device, other details e.g. software/firmware version, uptime, language etc.
Note:
During the scan, DIVUS devices use the SNMP protocol to offer more details about their status and settings
than third party devices. Therefore, implementing DIVUS devices allows the DIVUS HEARTBEAT to show its full
potential. Third party devices may offer basic information i.e. their IP address, name and of course the used
network port.
3.5.1
THE GRAPHICAL SCHEME
The graphical scheme shows the main device (a DIVUS HEARTBEAT or a DIVUS MANAGED SWITCH) and all the
devices connected to it disposed around it. A line shows which device is connected to which port. Moreover, a
colour coding is used for the lines to show the conn
GREEN LINE
1000 Mbit/s
BLUE LINE
100 Mbit/s
PURPLE LINE
Manager-to-switch or switch-to-switch connection (1000 Mbit/s)
So usually there will be two schemes with light blue background, showing the MANAGER with its connected
devices (the first) and the MANAGED SWITCH with its connected devices (the second). If other switches are
attached, additional schemes will be added forming one big network scheme.
DIVUS devices will be recognized and shown with a matching image. Unrecognized devices will be shown with a
default question mark symbol.
If third party switches are detected, a node (purple dot) is shown on the connection line, signalling that more than
one device is connected to the shown port.