dixell iPro SERIES Installing And Operating Insructions Download

Page: 5 / 72

1592025700 IPROFAMILY stp GB 2012.08.08.doc

iPro Series

5/72

1. IMPORTANT

RECOMMENDATIONS

The

symbol alerts the user of non-insulated “dangerous voltage” within the product area that

is sufficiently high to constitute a risk of electric shock to persons.

The

symbol alerts the user of important operating and maintenance (assistance) instructions

found in the documentation attached to the device.

Dixell Srl cannot accept any liability for damages caused by modems that are not supported. Dixell

Srl reserves the right to modify this manual without prior notice. The documentation can be
downloaded from www.dixell.com even prior to purchase.

This manual forms part of the product and must always be kept near the device for easy and quick

reference. The device cannot be used as a safety device. Verify the limits of application before using
the device.

Verify that the power supply voltage is correct before connecting the device. Do not expose it to

water or humidity: use the controller only within the operating limits, avoiding sudden changes in
temperature and high atmospheric humidity in order to prevent condensation from forming.
Recommendation: disconnect all the electric connections before performing any maintenance. Insert
the probe where it cannot be reached by the End User. The device must not be opened. Consider
the maximum current that can be applied to each relay. Make sure that the wires for the probes, the
loads and the electrical power supply are separated and sufficiently distant from each other, without
crossing or intertwining with each other. In the case of applications in industrial environments, it may
be useful to use the main filters (our mod. FT1) in parallel to the inductive loads.

The customer shall bear full responsibility and risk for product configuration in order to achieve the

results pertaining to installation and/or final equipment/system. Upon the customer's request and
following a specific agreement, Dixell s.r.l. may be present during the start-up of the final
machine/application, as a consultant, however, under no circumstances can the company be held
responsible for the correct operation of the final equipment/system.

Since Dixell products form part of a very high level of technology, a

qualification/configuration/programming/commissioning stage is required to use them as best as
possible. Otherwise, these products may malfunction and Dixell cannot be held responsible. The
product must not be used in any way that differs from that stipulated in the documentation.

•

The device must always be inserted inside an electrical panel that can only be accessed by

authorised personnel. For safety purposes, the keyboard must be the only part that can be reached.

•

The device must never be hand-held while being used.

It is good practice to bear the following in mind for all Dixell products:

Prevent the electronic circuits from getting wet as contact made with water, humidity or any

other type of liquid can damage them. Comply with the temperature and humidity limits
specified in the manual in order to store the product correctly.

The device must not be installed in particularly hot environments as high temperatures can

damage it (electronic circuits and/or plastic components forming part of the casing). Comply
with the temperature and humidity limits specified in the manual in order to store the product
correctly.