Dixie Narco DN 2145 Technical Manual Download

Page: 15 / 89

most commonly used when a selection is out of
order and you are awaiting parts and do not want
the customer to utilize that selection. Press the
number “2” on the keypad and the display will scroll
“ENABLE ITEM”. Press the “*” key and the display
will read “ITEM”. There are now three choices:

1. Pressing the “*” key will toggle between

enabled and disabled for the entire machine,
the display will show the new state i.e.
enabled or disabled.

2. Pressing a tray selection followed by “*” will

show the new state of that tray. (For
example, pressing “A*” will show the new
state for the A tray. Pressing “A*” again will
toggle the state.)

3. Pressing an item selection will show the

current state of that item; for example,
pressing “A1” will show the new state of that
item, pressing “A1” again will toggle the
state.

After making any of the above selections, an audible
tone will be heard and the display will read OK
momentarily.
If a selection has been disabled in this mode and the
customer tries to purchase from the programmed
selection(s), the vender will display “SELECT
ANOTHER ITEM”.
Press the “CLR” key to return to “SERVICE MODE”.

SALES BY COLUMN -

Press key “3”

Shows the total number sold from each selection
since the last CLEAR TOTALS or MASTER RESET.
Press the number “3” on the keypad and the display
will scroll “SALES BY COLUMN”. Press the “*” key
and the display will read “ITEM”. Select the item to
be checked (the total number sold from that
selection will be on the right side of the display and
the item number will be on the left side of the
display). Press the “CLR” key to return to service
mode.

ESCROW -

Press key “4”

Allows a bill to be returned if the change return lever
is pressed before a selection is made. Factory
setting is ESCROW N.
Press the number “4” on the keypad and the display
will read “ESCROW Y” or “ESCROW N”, depending
on the current state. Pressing the “*” key toggle the
vender from ESCROW Y to ESCROW N. Example:
If “ESCROW Y” is showing on the display, pressing
the “*” key will disable the escrow function and the
display will read ESCROW N.
This feature only affects those machines with a bill
validator installed. Press the “CLR” key to return to
“SERVICE MODE”.

FORCE VEND -

Press key “5”

Forces the customer to make a vend by inhibiting
the coin return lever once the minimum vend price
line has been met or exceeded The coin return lever

will not be inhibited if there is not enough credit to
vend the lowest priced item or if a vend failure has
occurred. Factory setting is “FORCE N”.
Press the number “5” on the keypad the display will
read “FORCE Y” or “FORCE N”, depending on the
current state. Pressing the “*” key will toggle the
state. Press the “CLR” key to return to “SERVICE
MODE”.

AUDIO FEEDBACK ENABLED/DISABLED -

Press

key “6”

Allows an audible tone to be turned on and off. If
enabled, an audible tone is heard when keys are
pressed when making a selection and when
programming the vender.
Press the number “6” on the keypad and the display
will scroll “ENABLE AUDIO FEEDBACK” or
“DISABLE AUDIO FEEDBACK”. The factory setting
is disabled. Press the “*” key with the setting you
wish to use showing on the display. An audible tone
will be heard and the display will change to “OK”,
then return to Service mode.

SET REGULAR PRICES -

Press key “7”

Allows the setting of regular prices for an individual
item, a complete tray, or the entire machine. Factory
setting is $99.95.
Press the number “7” on the keypad and the display
will scroll “SET REGULAR PRICES”. Press the “*”
key and “$00.00” will be displayed. Prices are
entered using the numbers on the keypad and will
shift in from the right as numbers are pressed. Once
the desired price is showing on the display, use one
or all of the options listed below for setting the price
to the desired selection:

All selections.

Press the * key after

entering desired price and all selections in
the vender will now be set

5. One tray.

Pressing the letter of the shelf

followed by the * key will price that shelf to a
single price. For example, to price the A
shelf for $1.25, first dial in the price then
choose A followed by *.

6. Single selection.

Press the desired

selection number or numbers corresponding
to the selections that require changing.

Priority will be given to the higher ranked method.
For example, If one price on the A tray was set to
$1.50 using option 3 above and you wish to change
the remaining selections on that tray using option 2,
the pricing for the entire tray would take precedence.
Conversely, if the price was set using option 2 first
followed by the single selection using option 3, the
pricing for the remainder of the shelf would remain
and the new price for the single selection would
change to the new value.
Press the “CLR” key to return to “SERVICE MODE”.