Dixie Narco DN552P-7 Technical Manual Download

Page: 18 / 76

PROGRAMMING

P-SERIES

Page 18 of 76

SEC – SECONDARY PRICING

This function is used to program a second price for each selection. To move to Environmental Controls,
press & hold select buttons 1 & 2 simultaneously. To enter the sub-menu press select button 1. The
following are sub-menus of the Secondary Price Menu: (S-P2) “Price”, “Days”, (STRT) “Start”, “Stop”,
and (RTN) “Return”.

S-P2 - Price

This function is used to set the price of each selection. When a select button is pressed, the price
For that selection will be displayed. If the button is held in, the price will increment or decrement.
To change from increment to decrement, release the select button and press it again.

Note:

The SBC multi-pricing capability allows you to set all selections to any price in the range
of $0.00 to 99.95.

Press & and hold select buttons 1 & 2 simultaneously to move to the next item on the menu.

Days

This function is used to set the days of the week to be affected by secondary pricing.
Day of Week:
(SUN) Sunday

(WED) Wednesday

(SAT) Saturday

(RTN)

Return (RTN)

(MON) Monday

(THUR) Thursday

(ALL) All Days

(TUE) Tuesday

(FRI)

Friday

(NONE) No Days

Press select button 1 and “MON” will show on the display, where # is “0” (disable) or “1” (enable).
Press and hold select button 1 to toggle between “0” and “1”. Release the select button with the
display showing the setting you wish to use. Press select buttons 1 & 2 simultaneously to scroll
through all available days, “ALL”, “NONE”, and “RTN”. Pressing select button 1 when “ALL” is
displayed will cause the display to change to “on” when all days have been enabled. Pressing
select button 1 when “NONE” is” displayed will cause the display to change to “off” when all days
have been disabled. Press select button 1 at the “RTN” prompt returns to “Days”.

Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.

STRT - Start

This function is used to set the hours and minutes to start secondary pricing. Press select button
1 and the current four-digit hour and minute setting will be displayed. Press and hold select button
1 to change the hour setting, press button 2 to change the minute setting.

Press select buttons 1 & 2 simultaneously to move to the next item in the menu.

STOP - Stop

This function is used to set the hours and minutes to stop secondary pricing. Press select button
1 and the current four-digit hour and minute setting will be displayed. Press and hold select button
1 to change the hour setting, press button 2 to change the minute setting.

Press select buttons 1 & 2 simultaneously to move to the next item in the menu.

RTN - Return

Press button 1 to return to Secondary Pricing

Press buttons 1 & 2 to scroll to the next item in the menu

ECTL – ENVIRONMENTAL CONTROLS

This allows the user to view the energy conservation menu “LT” - “Lighting”, “RFRG” – “Refrigeration”,
and also the “Relay” test menu.

When this is programmed to “Off” you will not see (LT), (RFRG) or

(RLY).

Press select button 1 and the current setting will be displayed (On or Off). Press and hold select

button 1 to toggle between on and off (

This feature is “On” from the factory on P-Series machines).

To move to “LT” Light, press & hold select buttons 1 & 2 simultaneously with this feature on. To move to
“FREE” - Free Vend, press & hold select buttons 1 & 2 simultaneously with this feature off.