INSTALLATION & SETUP
9
Escrow:
This function supports 4 (four) escrow options. To show the current condition, press select button 1 will
enter mode and show current escrow setting. Press and hold select button 1 will scroll through the
available Escrow options and set the escrow mode to setting displayed when the select button1 is
released.
Price 1
This escrow condition is forced vend option 1 (“escrow to price”). All dollar bills will be stacked.
No cancel sale is allowed once minimum vend price is met or exceeded.
Price 2
This escrow condition is forced vend option 2 (“escrow no cancel”) with all bills stacked, and no
cancel sale allowed unless the vender is in exact change and the maximum vend price is
exceeded. Note: Any money entered below the vend price cannot be returned.
Select 4
This escrow condition is “escrow to select” with all the dollar bills being stacked. Cancel sale will
return the deposit from the coin changer (i.e.4 quarters).
Select 1
This escrow condition is “escrow to select dollar bills” with the last dollar bill that meets or
exceeds maximum vend price being escrowed in the validator. Cancel sale will return the held
dollar bill and any amount over $1 will be returned from the coin changer.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
Multi Vend:
This function, when turned on, allows credit to be retained after a vend so the customer can vend from
another selection. (i.e..50 vend price, put in $1.00, push a select button and vends, .50 still shows on the
display, push a second select button and vends). Credit is cancelled after 5 minutes of inactivity. There
is unlimited acceptance. If a customer wants their credit (money) back, the coin return lever must be
pressed. To show the current “Multi Vend” condition, press select button 1 and the display will show the
current setting. Press and hold button 1 to toggle Multi Vend from on and off.
Press and hold select buttons 1&2 simultaneously to move to “Return”.
Return:
Press and hold button 1 to move to “Cash Settings”.
Summary of Contents for DNCB 501E
