2
Warning
Read all instructions and make sure the appearance of the device has no damage before you use it.
Failure to follow all instructions listed below may result in electric shock fire and/or serious injury.
1.
Keep the working area nice and clean.
1.1
Mess and dark areas may cause of accidents.
1.2
Keep the device away from rain or moisture to decrease the risk of electric shock or short-
circuiting occurred.
2.
Be alert to workplace safety
2.1
Use the device under a well lit and clean environment.
2.2
Keep children and other people away unless the person has been assigned for the task to avoid
the danger of injury.
2.3
Do not play around while the tool is being used to avoid the danger of distractions.
2.4
Do not work with the device in potentially explosive environments in which there are
inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts
or fumes.
2.5
Do not use the device if you are tired or under the influence of drugs, alcohol or medication.
3.
When the devices are not being used, store them in a safe place.
4.
Use a suitable device for the job will be safer at work and have a better result.
5.
Always use a screwdriver that is intended for the task you are undertaking. Do not overload or use
it improperly such as drilling or tapping.
6.
Dress properly. Do not wear loose clothing or jewels while operating the tool to avoid the danger of
trapping.
7.
Please hole the cordless screwdriver carefully before operating and avoid wrong operating method
8.
When using the electrical power tool, take into account the auxiliary handle or waist hook is
advantage of working conditions. On the contrary, the purposes of the waist hook or driver hook is
convenient to put the device away and easier to keep it out of reach of children.
9.
Look after either the device or the battery carefully and have any damaged parts repaired by an
authorized or qualified shop. Always keep the tool nice and clean; pay attention on the machine
grease which might ruin the tool.
10.
Disconnect the plug from the power source after the charger has been used.
11.
Take apart the battery from the device when it is not being used.
12.
Use only the accessories that are detailed in the operating instructions. The use of others which are
not recommended in the operating instructions may affect the functioning of the device. It could
lead to an increased risk of personal injury as well.
13.
Remain alert at all times and watch what you are doing during proceeding. Before operation,
always check every part is in good condition and move freely in order to function properly.
14.
This device only applies for metal screw bits designated with their dimensions and their shape. Do
not recommend to countersink or force of loading on any material such as plastic and wooden.
15.
The device does not apply for elastic or tensile load with washer on.
