7
(5) Torque Fixing Ring/Coupler:
1).Torque Fixing Ring: To prevent torque to be adjusted, fixed upside-underside housing and clutch.
2).Coupler: Fixed upside
-underside housing and clutch.
(6) Driver Hook:
It is convenient that the production lines are able to have spring balancers work together with the tools to
be more efficiently.
(7) Waist hook:
The waist hook allows users to carry the device easily by attaching it to their work belt.
(8) Functional light and the status indicator:
Whenever the remaining power in the rechargeable battery is fewer than 20%, the tool is still alive but
with red flash lights on. Once the remaining power is towards 10% or even fewer it may result in poor
performance with the continuing red lights on.
LED and Buzzer
Reached adjustment torque
NG
LED Display
Green light on-off
Red light on-off
Buzzer
1 short alarm
1 long alarm
Low Battery LED
Display & Buzzer
Capacity
20%↓(17.5V)
Capacity
10%↓(17V)
LED Display
Red light flicks
Red light turn on(Out of battery)
Buzzer
Non-stop B Short Buzzer
2 Short & 1 Long Buzzer
Screwdriver Action
Rotating
No Action
(9) Torque Adjustment Ring
:
Turn torque adjust ring counter clock wise to increase torque output, on the other hand decrease torque
output by turning torque adjust ring clock wise. 0 printed on the torque adjust ring indicates the minimum
torque for setting and 8 for the maximum torque setting. Do not turn torque adjust ring lower than 0 or
higher than 8 to avoid torque adjust ring getting stuck with clutch.
COUPLER
Torque Fixing Ring