8
(10) Hi/Lo Switch:
When the rotating speed needs to be changed, set up the switch to Hi for the fastest
rotation, and set up the switch to Lo for slowest rotation. It's possible that the uncompleted shut-off
occurs when the switch is setup to Lo and the presetting torque is more than 50% of torque range. Please
refer to the following table.
LO
扭力跳脫
PTA-B120
PTA-B90
PTA-B50F
PTA-B60
PTA-B35
PTA-B35F
正常跳脫
7.8N
m↓
5.9N
m↓
3.3N
m↓
3.9N
m↓
2.3N
m↓
2.3N
m↓
產生異常跳脫
7.8N
m↑
5.9N
m↑
3.3N
m↑
3.9N
m↑
2.3N
m↑
2.3N
m↑
(11) Hole for wrist band
Enable to install the wrist band which is more convenient and safer for users.
(12) Hole for wrist band
Prevent slip and help user grip the screwdriver
Torque setting identification. Three colors: blue, yellow, and red can help identify different torque setting
by the users.
2. Auxiliary handle
For easier use of the screwdriver, there is a handle for assisting purpose.
Warning, this power screwdriver delivers high torque, please install the handle
before doing work in order to avoid danger. We are not responsible for any damage
or injury caused by using this product without handle.
(1)
Installing the base
(2) Installing the handle
(3)
Complete
Other Cautions
1.
The best condition of using the tool is under 8 hours a day, do not over loaded.
2.
Do not attempt to repair or disassemble this cordless screwdriver without authorization. Always have
the device serviced by assigned factory or qualified person in order to have the warranty effective
continually.
3.
KILEWS is not responsible for any poor performance or damage caused by customers own
modification of the tool.
4.
It is necessary for the management to have individual operators read and follow up all instructions in
this manual. Do not attempt to repair or disassemble this cordless screwdriver themselves.
