Page 11
SPECIFICATIONS
Models ZTR 4515B and 4516K
CHASSIS:
Twin 12 gauge side frames and 7 gauge transmission and engine base plate.
BODY:
All body parts are made of high density polyethylene. Dent and corrosion
resistant. Front body contains access panel for battery service.
MOWER DECKS:
36" Deck: 11 GA Laser Cut Fabricated - 36" Cut Width
42" Deck: 13 GA Stamped Steel Construction - 42" Cut Width
50" Deck 11 GA Fabricated Construction/Reinforcement Ribs - 50" Cut Width
Cut height approximately 1" to 4" via 7 position lift handle.
BLADE DRIVE:
Electric clutch.
TRANSMISSION
:
Each rear wheel is independently driven by a HydroGear IZT hydrostatic drive.
ENGINE:
Model 4515B:
15HP Vanguard Briggs & Stratton, 4-Cycle, Single Cylinder, Overhead
Valve, Air-Cooled, Gasoline, Vertical Shaft With Cast Iron Cylinder
Sleeve, Oil Pump With Integral Oil Filter.
Model 4516K:
16 HP Kohler Command 16, 4-Cycle, Single Cylinder, Overhead Valve,
Air-Cooled, Gasoline, Pressure Lubricated, With Oil Filter, Vertical Shaft,
Aluminum Head and Block with Cast-Iron Cylinder Liner. Smart Spark
Ignition.
STARTING SYSTEM:
Electric by key switch operation with safety interlock blade drive.
TIRES:
Front
11 X 4.00 X 5 ribbed tread.
Rear
18 X 8.50 X 8 Multi-Trac
RECOMMENDED
TIRE PRESSURE:
Front
16-21 lbs.
Rear
8-14 lbs.
CAPACITIES:
Fuel
2.7 gallons total.
Engine
Briggs & Stratton - 1.50 quarts oil.
Kohler - 2 quarts oil with filter.
DIMENSIONS:
Width
44" Maximum Track Width
Height
42" to top edge of seat.
Length
72" hitch tab to front bumper.
Weight
Power Unit:
463 lbs.
w/36" Deck:
544 lbs.
w/42" Deck:
541 lbs.
NOTE:
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
