Page 32
OIL FILL:
1. Push the valve body
in and twist into the
detent notch.
2. Clean any spilled oil from engine and chassis.
3. Refill engine with type, and quantity of oil recommended by the engine
manufacturer in engine literature.
NOTE:
Oil changes require replacement of the oil filters. These filters can be obtained from
your authorized engine dealer.
The use of any other oil filter may cause damage to the engine.
Briggs & Stratton Oil Filter: P/N 492 932
Kohler Oil Filter: P/N 52 050 02
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
-PROTECT YOUR ENVIRONMENT-
Open
Closed
CHASSIS:
Number of grease zerks used:
(
6) for 36"
(7) for 42"
(7) for 50"
LOCATIONS:
(1) each front wheel caster tube and each front wheel hub.
(1) each mower deck hub.
SERVICE INTERVALS:
Every 50 hours of operation
RECOMMENDED GREASE:
Name brand wheel bearing or multi-purpose grease
Lubricate each front wheel to allow even distribution of grease
within the wheel, rotate or spin each front wheel after (3) pumps
of the grease gun. Repeat process until the appearance of
grease is noted completely around each caster axle.
LUBRICATION:
