Page 35
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and
conditions of grass, cut height setting, engine RPM and ground speed are some of the variables
that interact creating differences in cut quality. Examination of one or more of the above will
generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in
improving cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
Reduce mowing speed
Refer to page 31 for part numbers
Increase engine RPM to maximum
Sharpen or replace as required
Refer to page 25 for deck leveling
procedure
Clean out underside of mower deck
Refer to page 31 for part numbers
Refer to page 30 for correct tire
pressures
REMEDY
Ground speed
Incorrect engine to
mower deck belt
Engine RPM too low
Dull or bent blade
Un-level mower deck
Grass buildup under
mower deck
Improper blades
Uneven tire pressures
CAUSES
SITUATION
