MAINTENANCE
dixon-
39
Air Filter
Briggs & Stratton Engine
Loosen screws and remove air filter cover.
1.
Remove the filter cartridge by pulling upwards
2.
along the outside edge.
IMPORTANT INFORMATION
Operating the engine with loose or damaged
air cleaner components could allow unfiltered
air into the engine causing premature wear
and failure.
IMPORTANT INFORMATION
Do not use compressed air to clean the air
filter.
Do not wash the paper filter.
Do not oil the paper filter.
WARNING!
The engine and the exhaust system
become very hot during operation.
Risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes.
Remove the foam filter (precleaner). Clean
3.
the foam filter with mild detergent and water.
Squeeze dry in a clean cloth. do not oil the
foam sleeve.
Tap the paper filter against a fixed surface to
4.
remove dust. If the paper filter is still dirty, it
must be replaced.
Wipe clean the inside of air filter housing.
5.
Refit the foam filter (pre filter).
6.
8009-406
Loosen cover screws
8019-014
Remove filter
8019-015
Reinstall filter
Mount the filter in the air filter housing.
7.
Replace the cover over the air filter housing
8.
and secure with screws.
