background image

15

MAINTENANCE

 

General Purpose Grease

  Refer to Maintenance “ENGINE” Section

01965

➁ 

ENGINE

 

FRONT 

WHEEL 

BEARING 

ZERK

 

STEERING 

SECTOR 

GEAR 

TEETH

 

FRONT 

WHEEL 

BEARING 

ZERK

 

SPINDLE ZERK

 

SPINDLE ZERK

T

R
A
C

T

0

R

1 - Change more often when operating under a heavy load or in high ambient temperatures.

2 - Service more often when operating in dirty or dusty conditions.

E

N

G

I

N

E

3

2

2

2

2

3 - Replace blades more often when mowing in sandy soil.

4 - Not required if equipped with maintenance-free battery.

5 - See Cleaning in Maintenance Section.

1

,

1,2

2

4

5

1,2

BEFORE

EACH

USE

EVERY

8

HOURS

EVERY

25

HOURS

EVERY

50

HOURS

EVERY

100

HOURS

EVERY

SEASON

BEFORE

STORAGE

Inspect Muffler/Spark Arrester

Clean Air Filter

Change Engine Oil (with oil filter)

Replace Air Filter Paper Cartridge

Replace Spark Plug

Check Engine Oil Level

Clean Engine Cooling Fins

Clean Air Screen

Replace Oil Filter (If equipped)

Replace Fuel Filter

Change Engine Oil (without oil filter)

Lubrication Chart

Check Brake Operation

Check Battery Level

Check Tire Pressure

Clean Battery and Terminals

MAINTENANCE 

SCHEDULE

Check for Loose Fasteners

Check/Replace Mower Blades

Che

Clean Debris Off Steering Plate

ck Transaxle Cooling

Che

Check Operator Presence & ROS Systems

ck V-Belts

Check Mower Levelness

LUBRICATION CHART

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have 

been subjected to operator abuse or negligence.  To receive 

full value from the warranty, operator must main tain tractor 

as instructed in this manual.
Some adjustments will need to be made periodically to 

properly maintain your tractor.
At least once a season, check to see if you should make 

any of the adjustments described in the Service and 

Adjustments section of this manual.
• 

At least once a year you should replace the spark plug, 

clean or replace air filter, and check blades and belts 

for wear.  A new spark plug and clean air filter assure 

proper air-fuel mixture and help your engine run better 

and last longer.

BEFORE EACH USE

•  Check engine oil level.
•  Check brake operation.
•  Check tire pressure.
• 

Check operator presence and ROS systems for proper 

operation.

•  Check for loose fasteners.

IMPORTANT:

  DO NOT OIL OR GREASE THE PIVOT POINTS 

WHICH HAVE SPECIAL NYLON BEARINGS.  VISCOUS 

LU BRI CANTS WILL ATTRACT DUST AND DIRT THAT WILL 

SHORT EN THE LIFE OF THE SELF-LU BRI CAT ING BEARINGS.  

IF YOU FEEL THEY MUST BE LU BRI CAT ED, USE ONLY A DRY, 

POW DERED GRAPHITE TYPE LU BRI CANT SPARINGLY.

Summary of Contents for D19KH42

































Reviews: