background image

9

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments.  

Save this manual for future reference.

(A) ATTACHMENT LIFT SWITCH 

- Used to raise and 

lower the mower deck or other attachments mounted to 

your tractor. Ignition must be on to operate this switch.

(B) BRAKE PEDAL

 - Used for brak ing the tractor and 

start ing the engine.

(C) PARKING BRAKE

 - Locks clutch/brake pedal into 

the brake position.

(D) THROTTLE CONTROL

 - Used for starting and control-

ling engine speed. 

(E)  ATTACHMENT CLUTCH SWITCH

 - Used to engage 

the mow er blades, or other at tach ments mounted to your 

tractor.

(F) IGNITION SWITCH

 - Used for starting and stopping 

the engine.

(G) REVERSE OPERATION SYSTEM (ROS) "ON" 

POSITION

 - Allows operation of mower or other powered 

attachment while in reverse.

(H) LIGHT SWITCH

 - Turns the headlights on and off.

(J)  CRUISE CONTROL LEVER

 - Used to set forward 

movement of tractor at desired speed without holding the 

forward drive pedal.

(K)  FORWARD DRIVE PEDAL

 - Used for forward move-

ment of tractor.

(L)  REVERSE DRIVE PEDAL

 - Used for reverse move-

ment of tractor.

(M) FREEWHEEL CONTROL

 - Disengages transmission 

for pushing or slowly tow ing the trac tor with the engine off.

(N) CHOKE CONTROL

 - Used when starting a cold engine.

(P) HOURMETER 

- Indicates hours of operation.

(W) AT TACH MENT LIFT INDICATOR

 - de ter mines the 

cut ting height.

(Z) AMMETER

 - Indicates charging (

+

) or discharging (

-

of battery.

OPERATION

Our tractors conform to the applicable safety standards of the American National Standards Institute. 

Fig. 3

E

A

M

F

B

W

J

Z

N

K

G

C

H

D

P

L

Summary of Contents for D26BH54































Reviews: