CARE AND MAINTENANCE
37
BELTS:
Check belts every 50 hours. Replace any belts found to
be in poor condition.
BELT TENSION:
Engine to Mower Deck Belt:
P/N 11339
To adjust tension of the mower deck drive belt, turn
adjuster nut on threaded eyebolt. Turning nut to the right
will make the belt tighter. Turning nut to the left will
loosen the belt.
Note: Belt deflection or movement should be approximately
1/4” when measured at mid-point between pulleys.
Periodically inspect both belt and idler systems.