TECHNICAL DATA
ZTR Model 3302
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 3954
from transaxle backing plate, raise and
push body and seat assembly forward.
2. Loosen four seat bolts, P/N 3227 and
slide seat forward or backward to
desired position.
3. Re -tighten seat adjustment bolts P/N
3227. DO NOT operate mower without
seat adjustment bolts properly
tightened.
4. Close upper body and push retention
latch P/N 3954 over transaxle backing
plate.
D I X O N I N D U S T R I E S , I N C . A
B L O U N T C O M P A N Y A I R P O R T
I N D U S T R I A L P A R K
P O B O X 1 5 6 9
C O F F E Y V I L L E K S 6 7 3 3 7 0 9 4 5
316251 2000
FAX 316 251 4117
Page 1 of 8
