Dixon SPEEDZTR 30, Operator And Parts Manual

9

3

CONTAINER MOUNTING

1. Install container, centering between support

tubes.

NOTE: 

One container should always

overlap the other container at supports.

2. Close cover and lock latch handles over

center support tubes.

ASSEMBLY

WARNING

DO NOT operate mower unless container is
properly installed. Container is subject to
wear and deterioration, check containers
frequently, replace when cracked or dam-
aged. Use only a recommended replace-
ment container.

Cover Latch
Handle

Support
Tubes

Containers

1. Remove mower deck from machine. Refer to

Operator’s Manual, if necessary.

2. Install the high lift adapters to existing high lift

mower blade. This combination provides the
highest lift possible. Results may vary de-
pending on mowing conditions and the type
and heaviness of grass to be bagged. If
desired, high lift adapters may be removed,
though high lift blades must remain in the
deck when using a grass catcher.

3. Position the booster ring on the bottom of the

deck. Attach the booster ring to deck with the
bolts and washers to the outside of the ring.
Refer to illustration. Secure with nyloc nuts.

4. Spin the mower blade several times to check

for sufficient clearance. CONTACT WITH
BLADE WILL DAMAGE BOOSTER RING
AND MAY RESULT IN SERIOUS INJURY.

5. Reinstall deck to machine. Refer to Operator's

Manual, if necessary.

WARNING

Blades are sharp. Protect your
hands with gloves and/or wrap
blades with a heavy cloth when
handling.

Booster
Ring

blade

rotation

4

BOOSTER RING