BLADE DRIVE:
•
Located on the control panel, on operator’s right.
•
To engage the mower blade, pull up on the switch.
•
To disengage mower blade, push down.
CIRCUIT BREAKER:
•
Protection of the electrical system is by (1) 15 amp
circuit breaker.
•
If circuit breaker trips, push button to reset.
•
If this condition repeats, consult dealer for
inspection and repair.
THROTTLE CONTROL LEVER:
•
Located on control panel to operator’s right.
•
Throttle control for engine speed.
•
Choke for engine starting.
•
Throttle control should be set to MAXIMUM or wide
open setting to insure adequate cooling of the
engine and to maintain mower deck blade speed
while mowing.
MOWER DECK CUT HEIGHT LIFT LEVER
:
•
Located to the right side of the front panel.
•
Controls the cutting height.
•
Six positions of adjustment.
•
Move lever down to lower.
•
Move lever up to raise.
NOTE: Always use high for transport.
18
CONTROLS
Summary of Contents for SPEEDZTR ZTR 36
Page 1: ...Model Year 2004 ZTR SPEEDZTR...
Page 13: ...13...
Page 35: ...CARE MAINTENANCE DECK REMOVAL continued 36 42 35...
