39
CARE AND MAINTENANCE
CHANGING THE ENGINE OIL:
1.
The “Dapco” oil drain valve is located on the left
side of the engine crankcase (Model 4515B &
4518K) and on the right side of the engine
crankcase (Model 4516K).
2.
Place a suitable container under the drain valve.
The fitting of a short piece of hose will help direct
the oil.
3.
To drain, turn hex head valve stem counter--
clockwise with a 10mm wrench or socket. Open
to full open (approximately 7 turns).
4.
After engine is drained, tighten hex stem.
NOTE: Refer to engine manufacturer’s recommendations
for frequency of oil changes.
CAUTION
HOT oil may cause burns. Allow engine to cool before
draining oil.
Hex Head Valve Stem
Summary of Contents for Zeeter Classic ZTR 2002
Page 1: ...ZTR OPERATOR S MANUAL 4500 SERIES 2002...
Page 46: ...46 NOTES...
