TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any mower. Type and conditions of
grass, cut height setting, engine RPM and ground speed are some of the variables that interact
creating differences in cut quality. Examination of one or more of the above will generally produce
a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving cut
quality. Your Dixon ZTR dealer is also available to provide assistance to you.
Poor cut quality
Engine RPM too low
Increase engine RPM to maximum
Poor cut quality
Ground speed
Reduce mowing speed
Poor cut quality
Grass buildup under mower
deck
Clean out underside of mower deck
Poor cut quality
Dull or bent blade
Sharpen or replace as required
Poor cut quality
Incorrect engine to mower
deck belt
Use ONLY original equipment belts
Poor cut quality
Uneven tire pressures
Check and adjust as required per
operators manual
Poor cut quality
Improper blades
Replace with original equipment blade
designed for the size of mower deck
fitted.
Poor cut quality
Un-level mower deck
Consult your dealer
SITUATION
CAUSES
REMEDY
Page 28
Summary of Contents for ZTR 1001
