32
OPERATION INSTRUCTIONS
DECK ROLLERS (60” deck):
Purpose:
The spring loaded deck rollers located at the
front corners of the 60” mower deck are
designed as an aid to limit turf scalping when
mowing on uneven ground.
Height:
Normal height settings as installed at the
factory allows each roller to ride slightly above
the turf. This setting should prove ideal under
most mowing conditions.
Adjustment: Some mowing applications may require
lowering of each front roller. To lower the
roller, remove the pin, spring, washers and
spacer (P/N 9789) from the top of roller
bracket tube. Remove roller bracket from
tube. Slide spacer P/N 9789 on roller
bracket shaft and reassemble using washer,
spring and pin at the top.
Lubrication: The use of a penetrating oil or light grease on
the roller bracket shafts will keep roller moving
freely.
