35
A . Move cut height adjustment lever to lowest
position.
B. Flip up the foot deck to allow access to the en-
gine to deck drive belt. Roll the engine to deck
drive belt off the center spindle.
C . Lift the rear corner of the deck and remove 1/2”
x 1-1/2” clevis pin from lift link/eye bolt. Repeat
for the other side.
D . Position the front caster wheels so they are away
from the deck (such as the tractor would be
traveling in reverse).
E . Attach a hoist to the deck lift bolt. Lift the nose
of the deck until the deck is standing vertical and
the deck latch engages.
F. Reverse procedure for lowering deck.
IMPORTANT NOTE: Make sure that the deck is lifted
far enough for the deck latch to fully engage the
locking pin (located on the left side of the deck
mounting suspension). This will prevent the deck
from falling down when servicing the underside of
the mower deck.
CARE AND MAINTENANCE
PROCEDURE FOR RAISING AND LOWERING
THE DECK FOR SERVICING:
