background image

10

DIXON INDUSTRIES, INC.
a BLOUNT company
AIRPORT INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS  67337 0945
316 251 2000
FAX 316 251 4117

DIXON LIMITED WARRANTY POLICY - COMMERCIAL MODELS

8000 Series

WARRANTY:  Home Owner Application:  This  Dixon Warranty term is for a period of three (3) years  from date of
purchase.  Commercial Application:  Dixon mowers used for commercial application are warranted for one (1) year
from the date of purchase or 750 hours whichever comes first.  Commercial use is specified as use other than, or in
addition to, mowing at owner's primary place of residence.

DIXON ZTR MOWERS  ARE WARRANTED AGAINST DEFECTS IN MATERIALS

AND WORKMANSHIP AND PROVIDES FOR REPLACEMENT OR REPAIR OF PARTS INCLUDING

LABOR COSTS.  THIS WARRANTY IS  SUBJECT  TO THE FOLLOWING  CONDITIONS

AND LIMITATIONS:

1.

Warranty applies only to original retail purchaser of new and unused mowers and accessories.

2.

All Dixon warranty must be accomplished by authorized Dixon dealers and in accordance with Dixon
warranty policy and  allowances. All warranty claims must be approved by Dixon Industries, Inc.

3.

Battery warranty: Limited to 90 days from date of purchase.

4.

Accessories Warranty (Grass Catchers, Snow Blades, Covers, etc.): Limited to 90 days from date of
purchase.

5

Warranty does not apply to damage in transit or incidents of misuse, negligence, accidents, or alteration.
The use of parts or  components other than those supplied by Dixon Industries, Inc. VOIDS ALL
WARRANTY.

6.

The following items are not covered by this warranty policy:
(a)

Pick up and delivery charges for transportation of mower to and from an authorized Dixon dealer's

         place of  business.
(b)    Routine maintenance or adjustments.
(c)

Belts/cutting blades/Hydrostatic filters.

(d)    Engines--All engines used on Dixon ZTR mowers are warranted by the individual engine manufacturer.
(e)

Any costs or expense of providing substitute equipment while repair work is being performed on a

         warranted mower.

7.

There is no other express warranty. Implied warranties, including those of merchantability and fitness for a
particular purpose, are limited to the same duration of the express warranty, and to the extent permitted by
law any and all implied warranties are excluded. Liabilities for consequential damages under any and all
warranties are excluded.

Blue/Customer     Yellow/Dealer     White/Dixon Ind.

WARRANTY VALIDATION:   At the time of sale, selling dealer must review each portion of this warranty
document, complete the information section below, secure customer's signature &send copy to Dixon Industries, Inc.

DATE OF PURCHASE

MODEL

S/N

Owner's Name

Dealership

Address

Address

Owner's Signature

Dealer's Signature

Summary of Contents for ZTR 8000 Series





































Reviews: