26
CARE AND MAINTENANCE
PARKING BRAKE ADJUSTMENT
1.
Loosen the locking screw on the top
knob of the brake engaging handle.
2.
Rotate it clockwise to increase and
counter-clockwise to decrease brake
holding power. As the brake holding
power is increased the force required
on the handle to engage the brake
increases.
3.
Set the brake for the holding power
required for the intended use and the
desired force required to activate it.
4.
Retighten the knob locking screw.
HEADLIGHT ADJUSTMENT
1.
Loosen the 1/2" retaining nut
underneath the headlight and
slide the headlight forward out
of the fuel tank.
2.
Loosen the 1/2" nut on the "U"
shaped holding bracket and
swivel the headlight vertically to
adjust the height of the beam.
Tighten the bracket nut.
3.
Replace headlight in fuel tank.
4.
Swivel the headlight horizontally
to illuminate the desired area and
tighten the headlight retaining nut.
Summary of Contents for ZTR 8000 Series
Page 1: ...1 Page 8000 SERIES Diesel Version ZTR MOWERS Operator s Manual 2001...
Page 15: ...15 CONTROLS...
Page 34: ...34 NOTES...
