34
Hex Head Valve Stem
HOT oil may cause burns. Allow
engine to cool before draining oil.
CAUTION
CARE AND MAINTENANCE
CHANGING THE ENGINE OIL:
1.
The Dapco oil drain valve is located on the left
side of the engine crankcase.
2.
Place a suitable container under the drain valve
hose.
3.
To drain, turn hex head valve stem counter--
clockwise with 10mm wrench or socket. Open
to full open (approximately 7 turns).
4.
After engine is drained, tighten hex stem.
5.
Change the oil filter.
6.
Fill with oil (see steps below).
NOTE: Refer to engine manufacturers recommendations
for frequency of oil changes.
OIL FILL:
1.
Clean any spilled oil from engine and chassis.
2.
Refill engine with type, and quantity of oil
recommended by the engine manufacturer in
engine literature.
Summary of Contents for ZTR CLASSIC
Page 1: ...ZTR 2003 OPERATOR S MANUAL ZTR CLASSIC...
Page 42: ...42 NOTES...
