6
Professional Tip - Flush Corners
When placing two corners together,
the pieces may not always appear
completely flush. This is okay. The
integrity of the module will not be
affected.
Drill screws in all eighteen (18) pre-drilled holes on the top and bottom tracks. When complete, flip the wall over
and drill eighteen (18) additional screws into the opposite side. You now have a completed Perimeter wall.
4
Step
4
x
2
Professional Tip - Uneven Holes
The pre-drilled holes in two pieces may not always align perfectly. If
this is the case, simply angle the screw into the opening of both holes
and then twist up while drilling.
1
2
3
Repeat steps 1-5 on pages 5-6. You should now have two complete Perimeter walls.
5
5
Step
