15
Belt-Positioning Booster Installation
Place booster seat against the
back of the vehicle seat. Have
child sit in seat with his back
and bottom fully in the seat.
2
WARNING
!
Do not use the base if the midpoint of your
child’s head is above the top of the vehicle seat
back.
3
Lift the armrest that is on the
opposite side of the vehicle
seat buckle by squeezing
buttons on the armrest and
swing up.
14
Belt-Positioning Booster Use
Lap/Shoulder Belt
Refer to the “Choosing
Restraint and Position” section
to make sure your child is at
the proper weight and height
to use the belt-positioning
booster.
When your child is over 40 lbs.
(18.1 kg) or 43” (110.1 cm) and
over 1 year old, you must use
this base as a belt-positioning
booster.
Some vehicle belts will not
work with a child restraint.
See previous page for specific
instructions.
Belt-P
ositioning Booster Use:
40-100 lbs.
(18.1-45.4 kg),
43
-57” (110.1-144.8 cm),
Ov
er 1 y
ear of age
.
Belt-P
ositioning Booster Use:
40-100 lbs.
(18.1-45.4 kg),
43
-57” (110.1-144.8 cm),
Ov
er 1 y
ear of age
.
continued on next page.
1
Use the backless booster
seat in the upright
position only.
For upright position, pull out
on handle and push down on
front of booster seat.
4538-3439C Intera Base 7/19/05 5:04 PM Page 17
